KEMIMOTO #3211180 UTV Drive Belt Compatible with Polaris RZR XP 1000/ XP 4 1000/ S 1000 General XP 1000 2013-2024 CVT Drive Belt

product features

1. Made of high-quality neoprene rubber and advanced aramid thread, it has high-temperature resistance, fire resistance, light weight, high strength, dimensional stability, puncture resistance, abrasion resistance, chemical corrosion resistance, and good mechanical properties And other advantages, durable
2. It wears evenly, reduces belt failures, and can provide you with the required performance and durability even under the most demanding conditions
3. The belt has minimal stretch under load, which can provide stable variable speed RPM

HOW TO EXTEND BELT LIFE?

Break in right and calm down correctly.
1. Increase the speed limit washer to prevent the main clutch from closing too far at high speed, thereby preventing the secondary clutch from opening too far and the belt from falling onto the clutch shaft.
2. Check whether the two clutches are aligned, if not, use a clutch alignment tool to help straighten the clutch.
3. Keeping the clutch clean will help improve performance and avoid clutch and belt wear.
4. Adjust your driving style, and don’t make violent accelerations on surfaces that are subject to a lot (such as sand and dirt).
5. Regularly check whether the vent of the CVT box is inserted.

HOW TO BREAK IN AND COOL DOWN CORRECTLY?

The most important, a break in a new CVT belt will result in a cooler-running belt with maximized life and performance.

1. Drive your UTV in two-wheel high for 20 minutes between 25-45 mph (40-72 km/h)in flat terrain, avoiding hard accelerations and hills.
2. Shift the belt through the normal operational range by varying your UTV speed and engine RPM. But do not exceed ¾ throttle during break-in. Avoid excessively fast instantaneous speed causing belt slippage.
In extremely cold weather, extend the break-in time by 5-10 minutes to make the belt warm up optimally.
3. After 20 minutes of driving, let the unit cool down for 30 minutes after turning off the engine.

4. Repeat the above thermal cycle steps, turn the unit OFF, and allow the belt to cool down again for 30 minutes.

Compatible with Polaris RZR/GENERAL

General
2023-2024 GENERAL XP 4 1000 Ultimate
2023-2024 GENERAL XP 4 1000 Sport
2023-2024 GENERAL XP 4 1000 Premium
2023-2024 GENERAL XP 1000 Ultimate
2023-2024 GENERAL XP 1000 Sport
2023-2024 GENERAL XP 1000 Premium
2022 GENERAL XP 4 1000 Troy Lee Designs Edition
2022 GENERAL XP 4 1000 Trailhead Edition
2022 GENERAL XP 4 1000 Deluxe RIDE COMMAND Edition
2022 GENERAL XP 4 1000 Deluxe
2022 GENERAL XP 1000 Troy Lee Designs Edition
2022 GENERAL XP 1000 Trailhead Edition
2022 GENERAL XP 1000 Deluxe RIDE COMMAND Edition
2022 GENERAL XP 1000 Deluxe
2021 Polaris GENERAL XP 4 1000 Pursuit Edition
2021 Polaris GENERAL XP 4 1000
2021 Polaris GENERAL XP 1000 Pursuit Edition
2021 Polaris GENERAL XP 1000
2021 general-xp-4-1000-factory-custom-edition
2021 general-xp-1000-factory-custom-edition
2020-2021 General XP 1000
2020 Polaris GENERAL XP 4 1000 Deluxe
2020 Polaris GENERAL XP 1000 Deluxe
2020 General XP 4 1000
RZR
2024, 2021-2022 RZR Trail S 1000 Ultimate
2023 RZR XP 4 1000 Ultimate
2023 RZR XP 1000 Ultimate
2023 RZR Trail S Ultimate
2023 RZR Trail S Premium
2022-2023 RZR XP 4 1000 Sport
2021-2023 RZR XP 1000 Sport
2021-2022 RZR Trail S 1000 Premium
2020-2023 RZR XP 4 1000 Premium
2020-2023 RZR XP 1000 Premium
2020-2022 RZR XP 4 1000 High Lifter
2020-2022 RZR XP 1000 High Lifter
2020-2022 RZR XP 100 Trails & Rocks
2020-2021 RZR XP 4 1000
2020, 2015 RZR XP 1000
2020 RZR XP 4 1000 LE
2020 RZR XP 1000 LE
2020 RZR Trail S 1000
2019 RZR® XP 4 1000 Ride Command Edition
2019 RZR® XP 4 1000 High Lifter Edition
2019 RZR® XP 4 1000 DYNAMIX Edition
2019 RZR® XP 4 1000
2019 RZR® XP 1000 Trails & Rocks Edition
2019 RZR® XP 1000 Ride Command Edition
2019 RZR® XP 1000 High Lifter Edition
2019 RZR® XP 1000 DYNAMIX Edition
2019 RZR® XP 1000
2019 RZR® S 1000
2018 RZR XP® 4 1000
2018 RZR XP® 1000
2017-2018 RZR® S 1000 EPS
2017 RZR XP® 4 1000 EPS
2017 RZR XP® 1000 EPS
2017 RZR XP® 4 1000 EPS High Lifter Edition
2016 RZR XP 4 1000 EPS High Lifter
2016 RZR S 1000 EPS
2015-2016 RZR XP 4 1000 EPS
2015-2016 RZR XP 1000 EPS

package Included

1*Drive Belt

Detail Models(for RZR/ for GENERAL)

●For RZR
○2015-2016 RZR XP 1000 EPS / 4 Seaters
○2016 RZR S 1000 EPS
○2016 RZR XP Turbo EPS
○2016 RZR XP 4 1000 EPS High Lifter
○2017 RZR XP 1000 EPS / 4 Seaters
○2017-2018 RZR S 1000 EPS
○2018-2020 RZR XP 1000 / 4 Seaters
○2019 RZR S 1000
○2019 RZR XP 1000 Trails & Rocks Edition
○2019 RZR XP 1000 DYNAMIX Edition / 4 Seaters
○2019 RZR XP 1000 High Lifter Edition / 4 Seaters
○2019 RZR XP 1000 Ride Command Edition / 4 Seaters
○2020 RZR Trail S 1000
○2020-2022 RZR XP 100 Trails & Rocks
○2020-2022 RZR XP 1000 High Lifter / 4 Seaters
○2020-2022 RZR XP 1000 Premium / 4 Seaters
○2021-2022 RZR Trail S 1000 Premium
○2021-2022 RZR Trail S 1000 Ultimate
○2021-2022 RZR XP 1000 Sport
●For GENERAL
○2020-2021 General XP 1000 Deluxe / 4 Seaters
○2020-2021 General XP 1000 / 4 Seaters
○2021 General XP 1000 Pursuit Edition / 4 Seaters
●OE Number Match:
Compatible with Polaris Belt for 3211180.
KEMIMOTO RZR drive belt constructed with double-cog designs.
For an exact match to the OE Number belt.